HobbyTown Play Smart: Available at participating HobbyTown stores

4 Wheel Drive

Why settle for 2 when you can have 4 for less cost! The Invictus raises the bar for performance and value delivering four wheel drive offering superior traction and control on all surfaces.

Radient Reaktor Brushless System

The Invictus 10MT includes the Radient Reaktor 3500kV brushless motor and a 35A waterproof ESC. The ESC allows you to use up to a 3s LiPo and includes thermal and current overload protection with low voltage cut-off to keep your system running in safe limits.

Waterproof Electronics

The Invictus utilizes a waterproof ESC and 6kg Servo so you can bash in most conditions and keep on truckin’. The receiver is stored in an all new integrated water resistant box that retains easy access.

HRS-3.1 2.4GHz Radio System

Utilizing one of the most advanced 2.4GHz radios on the basher market the HRS-3.1 brings features to your hand normally reserved for high end radios that are also easy to use!

Battery & Charger

H1,800mAh 9.6V 8 Cell NiMH rechargeable battery pack and A/C wall charger included.

HGC Chassis Layout

To classify as a Monster Truck, one thing you gotta have is ground clearance! Our new High Ground Clearance Chassis gives over 3 inches of ground clearance to avoid the high-centering suffered by other vehicles on the market.

Oil-filled Shocks

10mm bore oil filled, bladder top shocks with adjustable ride height and rebuild-able seal cartridges keep your truck supported over all the rough you can throw at it.

Gear Differentials

Rotating on ball bearings, the high performance steel used throughout the differentials make the Invictus’ drivetrain one of the strongest and most reliable in its class.

Additional Features

  1. Steel ring and pinion type four wheel drive drivetrain
  2. Waterproof ESC and Servo
  3. Water Resistant and receiver box
  4. HRS-3.1 2.4 GHz 3-Channel radio system
  5. 1800 mAH 8.4V 7 Cell NiMH rechargeable battery pack with Tamiya-Style plug
  6. Four wheel independent suspension
  7. Planetary metal gar differentials
  8. Ball bearing supported drivetrain
  9. Adjustable, oil filled, coil-over shock absorbers with bladders
  10. Adjustable suspension, camber, and front toe
  11. Pivot ball style front suspension with upper arm
  12. Stamped aluminum hinge pin braces
  13. Dual bell crank steering with servo saver
  14. Aluminum center drive shaft
  15. Dual purpose battery strap, works with LiPo and 7-8 Cell NiMH hump batteries
  16. 12mm Hex drive wheels
  17. Authentic “V-Tread” Style Swampers
  18. Realistic full size pickup style with flag poles in bed
  19. Adjustable body mounts
  20. Radient Reaktor 3500kv waterproof brushless system with 14T 32P pinion gear

Specifications

  • Assembly Time (min): 0
  • Battery (included): 1,800mAh NiMH 8-Cell, 9.6V
  • Body/Shell: Full Size Pick Up style
  • Charger (included): AC Wall Trickle
  • Chassis: Molded plastic
  • Completion Level: RTR
  • Drivetrain: 4WD
  • Experience Level: Beginner
  • Front Tire Diameter (mm): 127
  • Front Tire Width (mm): 68.5
  • Gear Pitch: 32P
  • Internal Transmission Gear Ratio: 8.8:1
  • Motor/Engine (included): Radient reaktor brushless sensorless 3500kV
  • Preparation Time: <1 Hour + charging time
  • Radio (included): 2.4GHz HRS-3.1 3-Channel
  • Rear Tire Diameter (mm): 127
  • Rear Tire Width (mm): 68.5
  • Recommended Usage Environment: Off-road, dry conditions
  • Scale: 1:10
  • Servos (included): 6kg Waterproof Full Size Separate, Futaba-style plug
  • Shock Type: Oil filled with bladders and adjustment clips
  • Speed (mph): 30+
  • Suspension: Four wheel independent
  • Wheel Mounting: 12mm Hex

What's in the Box

  • Invictus 1:10 Scale 4WD Electric Monster Truck
  • HRS-3.1 2.4GHz Radio System
  • 1800mAh 8-Cell NiMH battery pack

Needed to Complete

  • 4x AA-size batteries for transmitter