Metal Gears

Extremely durable all-metal main gears and a rugged planetary differential gets the power to the ground with reduced maintenance and easy servicing.

Precision Ball Bearings

Low friction ball bearings keep your drivetrain running smooth and efficient. Using rubber seals keeps the grease in and the dirt out, increasing run time and speed.

Adjustable Suspension

Long travel suspension arms and adjustable oil filled coil-over tuned shocks with bladders, keep you in control over the roughest terrain.

Ready-To-Run

The XLR comes 100% factory-assembled and includes a 50A/3000kV 4-pole brushless power system, a 3-channel 2.4GHz IKONNIK radio with fully proportional steering and throttle control, a 3000mAh 7-cell 8.4V NiMH battery pack, AC charger and multi-purpose wrench.

Features

IKONNIK HSR3.2 Radio System

  • 2.4GHz operation avoids conflicts with other users
  • Easily pairs with IKONNIK Xenon (Xe) protocol radio systems
  • Ergonomic grip, trigger and wheel
  • Proportional steering and throttle control
  • Adjustable digital sterring trim
  • Adjustable digital throttle trim
  • End-Point Adjustment (EPA)
  • Steering Dual Rate ((D/R)
  • Servo Reversing
  • Micro receiver
  • Beginner Mode
  • Feature Lock
  • Model Reset and Factory Reset

Specifications

  • Pairs With: IKONNIK Xenon (Xe) Protocol
  • Lipo Compatibility: 2S-3S (7.4V-11.1V)
  • Motor: Brushless 3000kV 4-pole sensorless
  • Battery: 7-cell 3000mAh NiMH, HCT-plug, hump configuration
  • Gear Pitch: 48P (standard pinion: 24T, optional: 27T, spur: 78T)
  • Wheels: 12mm hex (24mm OS, TRX compatible)
  • Length: 431.50mm (17in)
  • Height: 226.30mm (8.9in)
  • Width: 335.50mm (13.2in)
  • Wheelbase: 286.40mm (11.3in)
  • Weight (approx.): 1975g (4.35lb)
  • Internal Gear Ratio: 2.62:1

What's in the Box

  • 100% factory assembled Intrusion 10MT XLR
  • 3000mAh 7-cell NiMH battery pack
  • HRS-3.2 2.4GHz 3-channel radio system
  • 7-cell wall charger
  • 4-way cross spanner
  • Quick-start guide

Needed to Complete

  • 4x AA-size batteries for transmitter

Recommended for Maintenance

  • Cyanoacrylate (CA) glue, curved "body" scissors, needle nose pliers, side cutting pliers and hobby knife with #11 blade